WATER COOLING
-
Baktec’s complete range of BKL Ice Water Chillers, work according to the same principle: fresh drinking water under natural pressure, runs through a spiral in a 0°C water bath, forcibly cooled by means of ice, accumulated along the walls of the bath. The chilled water cannot be contaminated, as with this closed system the water is not in contact with open air. The outlet temperature remains stable, without major fluctuations, which improves the dough quality. By using powerful stirring motors with large fans, the optimal cooling capacity is reached. The ice water chillers are equipped with a digital Ice Mass Sensor (IMS) allowing optimum control over the accumulation of ice and maximum continuity. The water chillers are easy to install and do not need a pump.
-
-
The BKL 200 ICE EF is a powerful ice water cooler with one compressor. Because of the optimal harmonisation between the mechanical parts, the outcoming water temperature remains at a stable temperature, without any major fluctuations.
- Capacity 40 to 150 litre per hour
- Temperature with 1 unit: 1.5 °C – 3 °C*
- Dimensions (l x h x d): 50 x 86 x 50 cm
- Compressor: ½ PK / 18cc / Cooling capacity: 1125**
- Process speed (depending on water pressure) 12-20 l p/m
- Net water bath volume: 72 litres per bath
- Ice bank: 40 kg per bath
- Option: Stainless steel evaporator coil and cooling spiral
*Depending on inlet temperature and water pressure ** - 4° C evaporation temperature / 45° C condensation temperature
-
The Heavy Duty model is a very powerful ice water chiller provided with two compressors, which makes it possible to reach very low water temperatures and an optimal cooling capacity. This model is ideal for operation at high ambient temperatures of up to 40ºC.
- Capacity 40 to 250 litre per hour
- Temperature with 1 unit: 1 °C – 3 °C*
- Dimensions (l x h x d): 50 x 90 x 50 cm
- Compressor: 2 x ⅜ PK / 26cc / Cooling capacity:1700W**
*Depending on inlet temperature and water pressure ** - 4° C evaporation temperature / 45° C condensation temperature
-
-
- Capacity 40 to 440 litre per hour
- Temperature with 1 unit: 0.5 °C – 3 °C*
- Dimensions (l x h x d): 99,6 x 85 x 50 cm
- Compressor: 2 x½ PK / 26cc / Cooling capacity: 2250W**
The model BKL ICE DUO EF is provided with two separate water baths and 2 cooling units instead of one: two water chillers in one! The water is cooled down in two steps which makes it possible to reach very low temperatures under 2ºC, even with high inlet temperatures.
The DUO EF can be connected in series, for very low temperatures, or parallel, for a higher flow capacity. In addition, both cooling units of the DUO EF can be switched on separately. This makes it possible to turn off a cooling unit in winter, when less chilled water is used.
*Depending on inlet temperature and water pressure ** - 4° C evaporation temperature / 45° C condensation temperature
-
BIC industrial water chillers have been developed for large industrial bakeries and bakeries in countries with very high ambient temperatures (above 32°C). BIC water coolers are custom-made, have a capacity of 300 up to 5000 litres per hour and a processing speed of up to 80 litres per minute! BIC water chillers are very suitable for continuous use and made to measure to the specific needs and wishes of the customer. The chilled water remains at a stable temperature below 2°C without major fluctuations, which improves the dough quality and optimizes the process.
BIC industrial water chillers have a stainless steel housing and integrated water tank, pump, condenser and controls. The built-in pump keeps the water pressure continuously stable on the outward cooling water pipe. The insulated water tank is made from stainless steel and is fully sealed in order to prevent potential algae growth due to exposure to light. These units are supplied plug ready; fill the tank with water, connect the pipes to the unit and you’re ready for operation.
Options:
- Can be modified to suit norms and regulations in specific countries.
- Modifications to all voltages and frequencies.
- Machine featuring wheels instead of rubber feet.
- Modifications for extreme ambient temperatures.
- Condenser for external set-up.
- Stainless steel water pipes.